CHIMNEY SEGMENT ∠90°, ⌀90 MM

For installing the chimney at a 90 degrees angle

MORZH tents are usually purchased with stoves, whose chimneys consist of six segments. This is sufficient for good draft and efficiency of the stove. However, if you want to install the standard chimney at a different angle, you can purchase this segment.

Our wood-burning stoves are equipped with a spark arrester,but an additional chimney section further reduces the likelihood of sparks reaching the tent. Extending the chimney increases the stove's thermal efficiency and helps to remove smoke more effectively on the outside.

Suitable for stoves with a pipe diameter of 90 mm.

Replacing damaged segments

The chimney is easy to assemble even without additional instructions, so it only takes a moment. Just install the segments one by one. The extra segment can be stored in a bag with the stove or inside the firebox.

*Make sure that all segments are tightly connected to each other!

Highly durable Material

Like the stove, the chimney segment is also made of AISI 430 stainless steel. The segment has moderate corrosion resistance and does not deform at pipe temperatures of 500°C and above.

Correct operation

To ensure the long life of the stove and its components, regularly clean the chimney of soot. The type of fuel also affects the chimney durability. Only use wood or charcoal as fuel. Do not use gas, flammable liquids, coal, cardboard, or paper.

Note that when the stove is first lit, the pipe may glow red. This is completely normal, as the chimney heats up, with segments reaching temperatures of 500°C or higher.